Hot Dipped Zinc Coated Carbon Steel Galvanized Steel Sheet
2mm thick Hot dip galvanized steel sizes galvanized sheet
- Available Size:
- Thickness:0.13-4mm;width:600-1500mm;length:1000-12000mm
- Material:
- Material:SGHC, SGCC, DX51D, Q195, all according to the customer's request
- Payments:
- 30% T/T deposit,70% T/T or 70% L/C at sight balance
Inquiry
Product Details
Galvanized sheet refers to a steel plate coated with a layer of zinc on the surface,Galvanizing is an economical and effective an-rust method which is often used.
By galvanized, it can be to prevent corrosion on the surface of the steel sheet and prolong its sevice life. the surface of the steel sheet is coated with a layer of metai
zinc. this kind of galvanized steel sheet is called galvanized sheet.
According to the production and processing methods, it can be divided into the following types.
1)Hot-dip galvanized steel sheet
2)Alloyed galvanized steel sheet
3)Electro-galvanized steel sheet
4)Single-sided and double-sided differential galvanized steel sheet
5)Alloy, composite galvanized steel sheet
In addition to the above five types, there are color galvanized steel sheet, printed coated galvanized steel sheets, and PVC laminated galvanized steel sheets.
But currently the most commonly used is still hot-dip galvanized sheet.
Appearance:
1) Surface conditon:because the different treatment methods in the coating process , the surface condition of the galvanized sheet is also differenent, such as ordinary spangle,
fine spangle, flat spangle,zinc-free spangle, and phosphated surface.
2) The galvanized sheet should have a good appearance, and should not have defects harmful to the use of the product, such as no plating,holes,cracks and scum,excessive plating
thickness, scratches, chromic acid dirt, white rust,etc. Foreign standards are not very clear about specific appearance defects, some specific defects should be listed in the contract
when ordering.
Product Parameter
Product standard
JIS G3302—94 Galvanized steel sheet
JIS G3312—94 Colored galvanized iron sheet
JIS G3313—90（96）Galvanized steel sheet and steel stripGeneral requirement for hot-dip galvanized sheet steel ASTMA 527—90（75）Bitten hot-dip galvanized steel sheet；
ASTMA528—90Deep-drawing grade hot-dip galvanized steel sheet；Hot-dip galvanized sheet steel for roofing and siding；
ASTMA444—89Hot-dip galvanized steel sheet for trench；
ASTM A446—93Structural grade hot-dip galvanized steel sheet ；
ASTMA599—92Cold rolled electro-galvanized steel sheet；
ASTMA642—90Hot-dip galvanized special deoxidized deep-drawn steel sheet；
ΓOCT7118—78Galvanized steel sheet；
DINEN10142-91Part 1 Mild steel hot-dip galvanized steel strip and steel plate；
DINEN1012-92Part 2 hot-dip galvanized steel sheet.
Standard | JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer's request |
Surface | Galvanized |
Thickness | 0.12mm-4.0mm, all available |
Length | 6m and 5.8m or as customer's request |
Coating Weight | 30-275g/m2,double side |
Spangle | Big spangle, normal spangle, small spangle, non-spangle |
Technology | Hot Dipped |
Edge | mill edge, cut edge |
Delivery Time | within 15-20 days after receive 30% deposit or depend on Quantity |
Payment Term | T/T, Irrevocable L/C at sight (30% deposit) |
Trade Term | EXW, FOB, CFR, CIF |
Application
Our after-sale Service
Our Product Services
Cut large coils into small coils or Strip.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.
Packaging & Shipping
Common Package:
Waterproof Kraft Paper + Wooden Pallet (each 3 tons) + Bundle with steel strip.
Or Package can also according to your requirements.
The time of delivery:
Within 7-10 days after receipt of advance payment
Inquiry
Chinese
English
Catalog
