Hot rolled carbon steel SS400 Q235b A36 iron plate coil ms steel sheet
Q235 coil hot rolled steel
- Available Size:
- Width: 600-1500mm Thickness: 2-25mm Length:customized
- Material:
- Q195,Q215,Q235,
- Payments:
- 30% T/T deposit,70% T/T or 70% L/C at sight balance
Inquiry
Product Details
Hot rolled
Continuous casting slabs or primary rolling slabs are used as raw materials, heated by a stepping furnace, and dephosphorized by high-pressure water, and then enter the roughing mill. The rough rolling material is cut through the head, tail, and then into the finishing mill, and computer-controlled rolling is carried out. After the final rolling, it will go through laminar cooling (computer-controlled cooling rate) and take-up by the coiler to become a straight hair coil. The head and tail of straight hair curls tend to be tongue-shaped and fish-tailed, with poor thickness and width accuracy, and often have wavy, folded, tower-shaped and other defects on the edges. The coil is heavier and the inner diameter of the steel coil is 760mm. (Generally used in the pipe-making industry.) After straightening the hair through the cutting head, tail cutting, trimming and multi-pass straightening and smoothing finishing lines, and then cutting or re-rolling, it becomes: hot rolling Steel plates, flat hot rolled steel coils, slitting tapes and other products. If the hot-rolled finishing coil is pickled to remove scale and coated with oil, it will become a hot-rolled pickled coil.
Product Parameter
Commodity | Cold rolled Steel |
Grade | Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12,ST13,ST14,ST15,ST16,DC01,
DC03,DC04,DC05,DC06 |
Standard | ISO,JIS,ASTM,AS EN |
Mechnical | Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality |
Surface treatment | Chromated and oiled, and ant-ifinger |
Hardness | Softy, half hard ,hard quality |
Thickness | 0.12-6.0mm |
Width | 600-1500mm |
Coil weight | 1 ton |
Application
Application
1)Pipes for pipelines, water, gas pipes
2)For chemical engineering, electricity and other projects.
3)Building structure tube
4)Tubing, casing and oil and gas pipelines, structural tubes, slurry, brine pipelines and other
Our after-sale Service
Our Product Services
Cut large coils into small coils or Strip.
For steel coils, we can cut one large steel coil into small steel coils for loading at seaport; because for container shipping, each container usually loads weight can not be over 26 tons, but each large coil is usually about 28 tons, so one large coils has to be cut into small coils, and because the forklift usually takes 7-10 tons at seaport, so for easy loading into conatiner, each large steel coil usually is cut into 3 small coils. For bulk vessel shipping, it usually demands coils weight under 18 tons, so most times, also need cut one large coil into 2 small coils.
Open flat coils into steel plate.
For final application, need open flat the coils and cut the coils into steel plate, so we open flat the coils and cut the coils to steel plate to the sizes as required. For saving cost for loading by container, load into 20 feet containers, so cut the length under 5800mm, usually as required to cut to length 2440mm and 5800mm, width usually be 1220mm and 1500mm.after cutting the steel coils into steel plate, we can do black paints on the surface of the plate to make the plate to be anti-rust.
Packaging & Shipping
Common Package:
Waterproof Kraft Paper + Wooden Pallet (each 3 tons) + Bundle with steel strip.
Or Package can also according to your requirements.
The time of delivery:
Within 7-10 days after receipt of advance payment
Inquiry
Chinese
English
Catalog
